The CEL633C is an Environmental sound level meter, suitable for applications that demand an accurate meter of the correct grade along with detailed measurement storage with Time History and automatic measurement timers.
This meter can be used without a computer, reading the measurements from the screen, but really benefits from having the Insight software to download the detailed time history measurements.
As this meter measures all parameters at the same time there is no need to select what you need beforehand. Just make the measurement and everything is there.
The regulations and guidelines state that the meter's calibration should be checked before making measurements, and that you should keep records of these calibration checks.
Fit the Calibrator over the microphone as shown on the right and switch it on. The meter automatically detects the presence and correct fitting of the Calibrator and then starts the calibration process, which only takes a few seconds.
Calibration details are stored in the meter so that you can either make note or download them to a computer.
To start a measurement, simply press the Run/Stop key, shown on the right.
This starts the measurement and storing process for all parameters, the most important being LAeq, Lmax and Ln (L10, L90, etc). It also stores the time history of the noise, which provides a graph of the sound level over time.
The 1/3 octave band fitler measurements start automatically at the same time.
When you are happy that you have measured for long enough simply press the Stop key.
Color Coded Display
The current state of the sound level meter can be seen at a glance.
When not running the meter shows the current sound level and the border is red.
When running the meter shows the measurement parameters such as Leq or Lavg and the border is green.
For many environmental noise surveys, you need periodic (usually 5 minute, 15 minute or 1 hour) measurements showing values such as the Leq and the L90.
To make this type of measurement, set the meter to make repeating measurements of the required duration. The meter will now run for the specified period. It will then stop, store the results and start again automatically. Advanced timers even allow different measurement times for different days.
It is better to mount the meter on a tripod for this type of measurement. A tripod mount is included on the back of the meter. It can be fitted to a standard camera tripod, or we can provide you with a suitable one.
The meter will automatically store the 1/3 octave band spectrum at the selected rate. One of the most useful features of this meter is that you do not have to tell it what to measure, or even what range to use. Everything is measured and the wide-span meter covers the whole range from 20 to 140 dB(A).
The Class 1 sound level meter is available alone or as part of a Kit, which includes Meter, Calibrator and Peli Carrying Case.