The SoundEar Noise Warning Sign has proved very popular in hospitals, reminding staff, patients and visitors to be quiet in the usual locations:
These signs are commonly used within NICU and neonatal units, as well as on other general and intensive care units to remind not just the visitors but also the staff and patients to keep their noise levels down.
The presence of the noise warning sign in an obvious location is often enough to remind people about the area's sensitivity to noise.
Other than important alarms, there is usually no need for excessive noise on a hospital ward. It is usually caused by visitors and sometimes staff talking louder than necessary or people being careless when moving medical equipment or patients between rooms.
The SoundEar II is a clear and simple reminder to keep the noise levels down and if you forget it lights up to remind you.
The perfect location for a sign depends on the layout and the acoustics of the area in question. The most important aspect of the SoundEar is that it reminds people to keep the level down, so it is best to mount them where clearly visible to anybody entering the room or area. Often the Nurses Station is a good place to position one unit as this is usually in view to any body visiting and also to constantly remind the staff.
There is no simple rule about the level at which the sign should light up. Hospital wards and areas have different ambient noise levels and different acceptable limits. An intensive care unit will have a much lower noise threshold than a busy ward dealing with less critical illnesses. The best way to find the comfortable limit for a ward it to set the sign up to 55 dB (using the dial on the back). Run the sign for a few hours, or even a few days, and get a feel for whether it is being too sensitive for the given environment or whether it is letting people get away with too much. Adjust up or down by 5 dB as needed.
A level of 45 to 55 dB is common for neonatal and intensive care wards and 50 to 60 dB is common for other areas, although it does depend a lot on the acoustics of the areas in question.
For an immediate indication that the noise levels are too high, the standard SoundEar II is perfectly adequate. If you want to check the noise environment over a period of time, finding out when the noisiest and quietest times are or checking the function of quiet times then the Logging Module (order code SE2LOGGER) is ideal. It stores the average noise level every five minutes for download to a computer and analysis.
An approach taken by some hospitals and neonatal units is to have a few standard SoundEar signs and just one or two data logging modules. As the module just plugs in to the bottom of the sign it is very easy to move them round. One solution is to have a SoundEar sign in each room of interest and move the data logging module around between them every few days.
The SoundEar II noise warning sign and its optional data logging module.