Your region
 
Tel.  0845 680 0312
info@noisemeters.co.uk
Home > Products > Noise Warning Signs > SoundEar > SoundEar II > Installation and Setup

SoundEar II Noise Activated Warning Sign

soundear ii noise warning sign
SoundEar II Noise Warning Sign

Noise Activated Sign Installation

The SoundEar II Noise Activated Warning Sign is very easy to install. A simple three to four point process:

 

  1. Mounts on the wall on a single screw
  2. Plug in using supplied adapter
  3. Set the level at which to light up
  4. Adjust the level after a day or two experience

 

The mounting point can be seen on the rear of the noise sign. A single screw in the wall is adequate to hold the light-weight sign.

setting up the noise warning sign
Mounting and Adjusting the Noise Activated Sign

VESA Mounting

As shown in the image above, the SoundEar II also has standard 75mm x 75mm VESA mounts - this is the standard for mounting televisions and monitors, so many types of mount are available.

A VESA mount is not included with the SoundEar II. The order code is SE2VESA.


vesa wall mount for noise warning sign
Optional Wall Mount

Location and Sound Level

The perfect location for a sign depends on the layout and the acoustics of the area in question. The most important aspect of the SoundEar is that it reminds people to keep the level down, so it is best to mount them where clearly visible to anybody entering the room or area.

There is also no simple rule about the level at which the sign should light up. Different areas have different ambient noise levels and different acceptable limits. When a reasonable background level is required for conversation then a good starting point is to set the noise sign to light up at 55 dB(A) - the yellow lights will come on at 50 dB(A). Run the sign for a few hours, or even a few days, and get a feel for whether it is being too sensitive for the given environment or whether it is letting people get away with too much. Adjust up or down by 5 dB as needed.


Power


power adapter
Power Adapter

The SoundEar II comes complete with a plug-top power adapter. This provides the safe low voltage that the noise sign requires.

The SoundEar II has been developed for use in areas that need high electrical safety, such as hospitals, and has been approved in accordance with IEC 60601-1 (medical electrical equipment).

SE2EAR
£395.00
+VAT
SoundEar II Noise Warning Sign
In stock
SE2LOGGER
£265.00
+VAT
Data Logging Module for SoundEar II
In stock
More pricing information

SoundEar Range

SoundEar Classic
SoundEar Classic
Noise Warning Sign
From £325.00
SoundEar II
SoundEar II
Noise Warning Sign
From £395.00
SoundEar II
SoundEar II
Industrial Noise Sign
From £395.00
SoundEar 3
SoundEar 3
Advanced Logging Sign
From £870.00
Industrial Noise Sign
Industrial Noise Sign
Advanced Industrial Sign
From £870.00
SoundEar 3-320
SoundEar 3-320
Noise Processor
From £690.00
NoiseGuide
NoiseGuide
Office and Call Centre
From £480.00

How to Buy

Credit Card
Click the button or call 0845 680 0312.

Purchase Order
To: info@noisemeters.co.uk
Or by fax: 0845 680 0316.

Information Request




Prices and Ordering

The SoundEar II noise warning sign and its optional data logging module.

Order Code
Description
Purchase
Price (GBP)
excl VAT
 
SE2EAR
SoundEar II Noise Sign - Ear Symbol
£395.00
In stock
SE2LOGGER
Data logging module for SE2EAR and SE2IND
£265.00
In stock

 

Telephone 0845 680 0312  
info@noisemeters.co.uk  
Home - Contact - Applications - Products - News - Rental - Calibration - Search - Help
Sound Level Meters - Dosemeters - Noise Warning Signs - Accessories - Secure Site